|
 |
|
|
Download Tempurity™ System Software Components to any Windows® Computer and Connect
|
|
|
|||
|---|---|---|---|---|---|---|
| Secure SSL is implemented in all downloads |
Tempurity System Windows® Software Downloads
|
You need at least oneTempurity Server
A Tempurity Server is like a web page. A Tempurity Monitor is like a browser. Any Tempurity Monitor can connect to any Tempurity Server on the network as long as security allows. The below-listed sofware runs on Windows® 11,10,8,7 |
||||
Tempurity™ Server Version 2
|
||||
| for collecting data and for defining alarm threshold criteria | ||||
|
|
||||
Tempurity Server (v2.3) |
DOWNLOAD | |||
| You must right-click and "Run as Administrator" to install! | ||||
|
|
||||
Tempurity Server (Sendgrid version)
 |
DOWNLOAD | |||
| Sends alarm notifications from a fixed email address | Uninstall existing Tempurity Server! Then you must right-click on downloaded file and "RUN AS ADMINISTRATOR" to install! | |||
Tempurity™ Monitor Version 2
|
||||
| for viewing the collected data and for defining alarm notification groups | ||||
Tempurity Monitor (v2.1 English) |
DOWNLOAD | |||
|
|
Right-click and "Run as Administrator" to save the configuration permanently. | |||
NTMS Configuration Wizard
|
||||
| for configuring Networked Robotics' NTMS4 hardware for use on your network | ||||
NTMS Configuration Wizard (v9.0) new |
DOWNLOAD | |||
NTMS Configuration Wizard (v8.0) |
DOWNLOAD | |||
NTMS Configuration Wizard (v7.0-Installshield) |
DOWNLOAD | |||
Probe Calibration Wizard
|
||||
| to store and read calibration data to/from Networked Robotics' digital probes - requires Networked Robotics' Calibration Programmer hardware | ||||
| NR Probe Reader and Calibration Wizard, (v2.3) | DOWNLOAD | |||
NTMS Upgrade Wizard
|
||||
| for changing the firmware in Networked Robotics' NTMS4 network hardware | ||||
NTMS Upgrade Wizard (v2.0) |
DOWNLOAD | |||
|
|
