Incubator Temperature

Incubator temperatures are critical to ensuring growth. They give nurturing and protection to the most fragile of organisms and foster the growth of delicate cell cultures. To help ensure success, you need to know, at all times, the environmental conditions that support your cells.

The Tempurity System from Networked Robotics can help keep the occupants of your incubators safe and secure.

Click Here to Always Know Incubator Conditions!

The Networked Robotics system is the only system on the market that establishes network-based data collection directly from your Thermo Forma incubators or growth chambers. Unlike all other monitoring systems there are no additional sensors that can shift position, or get in the way of sample movement or door opening and closings. The Tempurity System acquires data through the serial port in the back of the unit. You can measure and store carbon dioxide and oxygen concentration, temperature, and humidity from each instrument (if equipped) and a single Networked Robotics NTMS4 can measure all of these parameters from four Forma incubators or growth chambers simultaneously. 

Through the Tempurity Monitor software, that is easily downloaded to any PC, you can define alarm notifications of text message, e-mail, or voice phone that will be sent if a value is not as you expect.  The Tempurity Monitor is simple, easy to use, and gives you the information you need.

The Tempurity Server software will store readings from all of your instruments, wherever they are on your network, so that you will always know the conditions supporting the growth of your cells.

Get Accurate Incubator Temperature and Carbon Dioxide Readings

With the Tempurity System, as it is used with Thermo Forma growth instruments, the reading stored in Tempurity will be the same as the reading on the front panel of the instrument. There are no discrepancies or confusion in readings that can be caused by adding other sensors. For a more detailed description of how Networked Robotics establishes direct connections to Forma incubators click on the Forma incubator interface details page under "Products". 

If you don't have Thermo Forma's incubators or growth chambers, you can use the same Networked Robotics hardware used for direct connections, the NTMS4, and Networked Robotics' advanced temperature and humidity sensors for data collection.  And you can mix methods. A single NTMS4 can collect data from

At Networked Robotics, we're committed to helping you achieve perfect results. We're ready to help you today. Call or e-mail us to start using Tempurity.

877 FRZ TEMP ( 877 379 8367)

877 GLP TEMP ( 877 457 8367)